Adjusting The Viewfinder; Attaching The Viewfinder - Panasonic AJ-CVF100G Mode D'emploi

Adjusting the Viewfinder

Attaching the Viewfinder

1
Confirm that the POWER switch of the camera is "OFF".
2
Insert the plug into the connection jack of the viewfinder.
<Note>
Be sure to insert the plug all the way into the connection jack.
3
Loosen the viewfinder left-right position anchoring ring.
4
While pulling up the viewfinder stopper, attach the viewfinder by sliding it in the
direction of the arrow. After attaching the viewfinder, check that the stopper is in
place.
Viewfinder stopper
5
Tighten the viewfinder left-right position anchoring ring.
E-7
Loosen the ring.
Viewfinder left-right
position anchoring ring