Troubleshooting - FRIGOGLASS EASYREACH EXPRESS 2.0 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 51
ENG
7.

Troubleshooting

If the cooler is not performing or not working at all before calling the authorized service provider,
please check the following.
FAULT
The unit does not
work.
8
If one or more of the bottles break while in the appliance and liquid spills
inside the cabinet or the space surrounding the appliance gets wet,
unplug the cooler before you clean the liquid around and inside the
cooler. Remember to take all necessary actions to protect yourselves
from broken glass (use protective gloves when cleaning).
ALL ACCESS TO COOLING SYSTEM AND ELECTRICAL PARTS
(CHANGING A LAMP OR REFRIGERATION DECK) MUST BE DONE
BY A QUALIFIED TECHNICIAN ONLY.
UNPLUG THE COOLER PRIOR TO ANY MAINTENANCE OR SERVICE
OPERATIONS. REMOVE THE PLUG AND MAKE SURE THAT THE
OPERATOR CAN CHECK FROM ANY OF THE POINTS WHICH HE
HAS ACCESS THAT THE CABLE IS UNPLUGGED.
After maintenance operations, make sure that the grounding
connections are in place before assembling the covers. Make sure
you use the same fastening components and covers.
If any electrical components need to be replaced, use only the
identical components in the spare part list supplied by the technical
service department of Frigoglass.
After maintenance operations make sure that the strain relief, which
supports the supply cord, is assembled properly.
Keep the glass door of the cooler closed during maintenance. If the
compressor needs to be replaced, you may need to use adequate
support to stabilize the cooler.
EASYREACH EXPRESS 2.0 [R290] is equipped with HC
refrigerant, and has been tested and proven to be safe according
to related standards.
All necessary actions for safe usage & maintenance of this
appliance are described in this manual. Read carefully before
using the appliance and follow all precautions included in this
manual.
To reduce the possibility of fire, this appliance must be installed
only by a suitably qualified person.
POSSIBLE REASONS
Power cord not plugged in.
HANDLING
Plug it.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

R290

Table des Matières