FRIGOGLASS EASYREACH EXPRESS 2.0 Manuel D'utilisation page 15

6.1 Cleaning of the Unit
It is important to clean the unit twice a year. In order to avoid mould formation, smells, etc., the product
compartments must be thoroughly cleaned. For cleaning the unit's external plastic parts, use a light
solution of soap and water. Do not apply hard chemical detergents on the plastics as they may loose
their brightness or even get deformed.
Same applies for the internal metallic surfaces. The use of hard chemical could harm the painting of
the metallic surfaces affecting thus the sanitary protection of the unit.

In case the merchandiser is placed in very dusty and/or greasy
environment, the regular cleaning of the condenser by an authorized
technician is mandatory.

Keep the cooler in a stable position during cleaning, do not step on
or lean over the cooler.

Do not clean with sharp objects, flammable or corrosive liquids or
sprays.
Remember to disconnect the mains from the socket before
cleaning the ICM's interior or exterior.
Never use a water hose or high-pressure jet to clean the cooler.
Do not remove the safety devices (grates, guards, groundings, etc.).
Keep the cooler in a stable position during cleaning, do not step on or
lean over the cooler.
Do not clean with sharp objects, flammable or corrosive liquids or sprays.
ENG
7