Connection To The Mains Supply; Operation Instructions - FRIGOGLASS EASYREACH EXPRESS 2.0 Manuel D'utilisation

ENG
3.2.3 Installation of the Shelves
The Easyreach Express is equipped with two shelves. These shelves form the two of the total three
loading levels on the unit. The shelves have different dimension in depth.
To adjust the shelf, you must first unload it. Then, lift
and remove the shelf base plate and follow the steps
below:
1. lift the shelf support from its back end,
2. tilt slightly forward,
3. pull to remove.
Place at the desired position by repeating the same
steps in the reverse order.
The unit is now ready to operate
3.3

Connection to the mains supply

Connect the ICM to a 220-240 Volts power supply on a 10A-16A fused & grounded socket.
Do not use extension cables.
3.4

Operation instructions

4
It is very important that the narrower rack is placed above the wider one.
If not, the unit's performance will be severely affected, as the air curtain
will be disrupted.
Do not connect the merchandiser to:

a non grounded wall socket or power line

improper supply voltage and frequency

power supply that does not comply with the safety regulations of the
appliance or with current legislation on electrical installations

Do not plug the cooler into a multiple outlet strip.

If the mains cord supplied is not long enough, do not use an
extension lead. Ask an authorized electrician to replace the cord with
a longer one, only if this is described in the list of authorized spare
parts.

Route the power cables in such a way that they are protected from
damage and they do not pose a risk of tripping.
Do not use the merchandiser to store food.
Do not store explosive substances such as aerosol cans with a flammable
propellant in this appliance.