Connection To The Mains Supply - FRIGOGLASS ICOOL 40/150 Manuel D'utilisation

ENG
Note: Specifically, the ICOOL-450L, 500 & 800 models are each equipped with 4 shelves with spacers
(on the back side) and one shelf without spacer.
The shelf without spacer has to be placed on top level in order to fit with the additional metal part for
air circulation, as shown in below pictures.
Shelf without spacer
Note: When using the optional front visibility shelving system, please follow the installation instructions
included in the shelving kit.
3.3

Connection to the mains supply

Connect the ICM to a 220-240 Volts power supply on a 10A-16A fused & grounded socket. Do not use
extension cables.
12
Do not connect the merchandiser to:

a non grounded wall socket or power line

improper supply voltage and frequency

power supply that does not comply with the safety regulations
of the appliance or with current legislation on electrical
installations

If the mains cord supplied is not long enough, do not use an
extension lead. Ask an authorised electrician to replace the cord
with a longer one, if such is described in the list of authorised
spare parts only.

Do not plug the cooler into a multiple outlet strip.

Route the mains cord in such a way that it is protected from
damage and does not pose a risk of tripping.
Additional metal part
Shelf with spacer