Appendix Cguidelines To Prevent Corrosion Of The Cabinet - FRIGOGLASS ICOOL 40/150 Manuel D'utilisation

ENG
3. Refrigeration system:

Check that the compressor is functioning properly.

Check the starting relay, the overload and the capacitor. The Supplier recommends that the
compressor's starting relays and overloads be replaced every 3-4 years.

Check the fan motor condenser and fan motor evaporator.

Check that the thermostat or the electronic controller and its components are functioning properly.

Check the cooling performance of the ICM.

Check the cooling circuit using the appropriate leak detector in case there is any concern or sign
of refrigerant leak.
1. Avoid damages resulting from improper installation & operation, improper maintenance &
cleaning, as well as improper handling and transportation, as per paragraphs 3, 5 and the
Appendix A above.
2. Do not perform unauthorised adaptations, modifications or adjustments to the cabinet.
26
GUIDELINES TO PREVENT CORROSION OF THE CABINET
APPENDIX C