Care & Cleaning; Troubleshooting - FRIGOGLASS ICOOL 40/150 Manuel D'utilisation

10. Care & cleaning
It is important to clean the merchandiser at least twice a year. In order to avoid mold formation,
odours, etc. product compartments must be thoroughly cleaned. The interior of the ICM should be
cleaned with a mildly soapy cloth and the glass surface using a window-cleaning agent.

11. Troubleshooting


Prior to any cleaning (inside or outside the device) procedure,
unplug the ICM! Remove the plug and make sure that the
operator can check from any of the points which he has access
that the cable is unplugged.

Never use a water hose or high pressure jet to clean the cooler.

In case the merchandiser is placed in very dusty and/or greasy
environment, the regular cleaning of the condenser by an
authorised technician is mandatory.

Keep the cooler in a stable position during cleaning, do not step
on or lean over the cooler.

Do not clean with sharp objects, flammable or corrosive liquids
or sprays.
All access to the cooling system and electrical parts (changing lighting or
refrigeration deck) must be performed by authorised personnel only.
Models ICOOL-40/150 [R600a], ICOOL-40/150 Platinum [R600a],
ICOOL-300/450L/500/800 [R290], ICOOL-300/500 Retro [R290],
ICOOL-300/500 Platinum [R290], ICOOL-900L/1300 HD [R290]
and ICOOL-900L/1300 SD [R290] are equipped with HC
refrigerant. All service operations on cooling mechanism & gas
charging should be performed in a well-ventilated environment
or in open air. Do not smoke during maintenance.

UNPLUG THE COOLER PRIOR TO ANY MAINTENANCE OR SERVICE
OPERATIONS. REMOVE THE PLUG AND MAKE SURE THAT THE
OPERATOR CAN CHECK FROM ANY OF THE POINTS WHICH HE HAS
ACCESS THAT THE CABLE IS UNPLUGGED.

After maintenance operations, make sure that the grounding
connections are in place before assembling the covers. Make sure
you use the same fastening components and covers.
ENG
21