Reducing Video Noise; Setting Child Lock; Selecting A Decoder Input Terminal - Pioneer PureVision PDP-506XDE Mode D'emploi

Basic Adjustment Settings
9
Select "System" ( / ).
10
Select a sound system ( / ).
• You can select from among "B/G", "D/K", "I", "L", and
"L'".
Manual Adjust
Programme Entry
Search
System
11
Select "Colour System" ( / ).
12
Select a colour system ( / ).
• You can select from among "Auto", "PAL", "SECAM",
and "4.43NTSC".
System
Colour System
Store
13
Select "Store" ( / ).
14
Select "Yes", "Yes (Listed)", or "No" ( / ).
Colour System
Store
Tuner NR
Item Description
You can select the channel using P +/P –.
Yes
Yes (Listed)
Select this option to register the channel as
your favourite channel.
You can select the channel using the Favourite
Channel list and P +/P –.
You cannot select the channel using P +/P –.
No
• To set up for another channel, repeat steps 6 to 14.
15
Press HOME MENU to exit the menu.
NOTE
• The above procedure transfers and sets the selected channel
information to the connected recording equipment such as
a VCR or DVD recorder (DVR).
• Manual Adjust also allows you to make selections for "Tuner
NR", "Child Lock", and "Decoder". See "Reducing video
noise", "Setting Child Lock", and "Selecting a decoder input
terminal".

Reducing video noise

For the individual channels, you can specify whether the
Plasma Display System should reduce video noise depending
on the levels of broadcasting signals.
1
Repeat steps 1 to 6 provided for "Using Manual Adjust".
• After selecting a channel (using Programme Entry),
perform the following steps.
2
Select "Tuner NR" ( / ).
3
4
1
42.75MHz
B/G
• This function may not achieve a satisfactory result,
depending on the conditions of broadcasting signals.
• When using a decoder with a decoder terminal selected, this
function may fail to achieve a good result.

Setting Child Lock

Child Lock inhibits selected TV channels from being tuned and
B/G
watched.
Auto
1
No
2
3
Auto
Yes
On
4

Selecting a decoder input terminal

If you have connected a decoder, select a decoder input
terminal (INPUT1).
1
2
3
4
• With "Off" (factory default) selected, you cannot watch any
images from the decoder.
Select "On" or "Off" ( / ).
Store
Tuner NR
Child Lock
Press HOME MENU to exit the menu.
NOTE
Repeat steps 1 to 6 provided for "Using Manual Adjust".
After selecting a channel (using Programme Entry),
perform the following steps.
Select "Child Lock" ( / ).
Select "Block" ( / ).
Tuner NR
Child Lock
Decoder
• The selection is switched between "View" and "Block".
Press HOME MENU to exit the menu.
Repeat steps 1 to 6 provided for "Using Manual Adjust".
After selecting a channel (using Programme Entry), do the
following steps.
Select "Decoder" ( / ).
Select "INPUT 1" ( / ).
Tuner NR
Child Lock
Decoder
Press HOME MENU to exit the menu.
NOTE
08
Yes
On
View
On
Block
Off
On
Block
INPUT1
31
En