Smart Dose Ii - Water Connector / System Divider; Smart Dose Ii Suction Pipe Kit - Ecolab Smart Dose II Rack Manuel D'utilisation

8.3.2 Smart Dose II – Water Connector / System Divider
Depending on the local laws related to the Federal Water Act, installing a backflow might
be required in order to meet legal requirements.
Fig. 9: Smart Dose II Water Connector / System Divider
You can order this backflow from Ecolab Engineering:
Description
Water connector / backflow
Scope of supply:
n 2 x hose connector 10/16 PVC textile-reinforced hose
n Pressure-reducing valve
NOTICE!
The TurboSmart rack does not have a stopcock at the water input end. If there
isn't an existing water stopcock in situ, one must be installed when connecting
to the water supply.
8.3.3

Smart Dose II Suction pipe kit

A suction pipe kit is also available. This kit contains all of the components required for
mounting the suction pipe on the standard Smart Dose II Rack with 4 pumps.
An expansion kit is available for installations with two Racks. This kit makes it possible to
supply both systems with product from one product supply container using just one
T-fitting. Therefore, the extra assembly with product supply containers can be omitted,
which has the advantage of saving space.
Description
Suction pipe kit 1 Rack Installation
Suction pipe kit 2 Rack Installation
The suction pipe kit's scope of delivery also includes the adapter to produce a secure
positive fit between the supply container and the suction pipe.
Wear and Spare Parts (Standard Version)
37
Item. no. EBS no.
201922 10010405
Item. no. EBS no.
201940 on request
201944 on request
417102260 Rev. 4-02.2019