Independent Modification And Spare Parts Manufacture; Metering Media; Safety Data Sheets - Ecolab Smart Dose II Rack Manuel D'utilisation

Safety
2.5

Independent modification and spare parts manufacture

CAUTION!
The system can only be converted using approved Ecolab upgrade kits.
No other modifications to the system are permitted under any circumstances.
Independent modifications or changes are only permitted after consultation and
with the consent of the manufacturer.
OE spare parts and accessories authorised by the manufacturer are in the
interests of safety.
If other parts are used, this invalidates liability for any resulting
consequences.
Please note that existing CE conformity will be rendered invalid by any
modifications.
2.6

Metering media

CAUTION!
Use of metering media:
– The metering system may only be used with products that have been
validated by Ecolab.
– The materials/media to be deployed for the intended use of the machine
are to be procured and used by the owner/operator of the machine.
– Correct handling of these materials/media and the risks involved are the
sole responsibility of the owner/operator.
– Hazard warnings and disposal instructions must be provided by the owner/
operator.
– When dealing with the metering medium, always use suitable protective
clothing (see the material safety data sheet for the metering medium).
– All safety regulations for the handling of chemicals must be maintained and
the information contained in the material safety data sheet/product data
sheet of the metering medium must be observed.
Liability is not accepted if invalidated products are used!
NOTICE!
The details on the metering medium safety sheet must be strictly observed;
operating personnel must be trained accordingly (training must be
documented)!
2.7

Safety data sheets

The safety data sheet is primarily intended for the user so that they can take any steps
necessary for safeguarding their health and safety at work.
417102260 Rev. 4-02.2019 14