Spare Parts: Wall Mounting; Spare Parts: Turbosmartpump Ii - Ecolab Smart Dose II Rack Manuel D'utilisation

Wear and Spare Parts (Standard Version)
8.2.3

Spare parts: Wall mounting

(see Fig. 5, Pos. 1).
The Smart Dose II Rack comes standard with a wall mount that allows the rack to be
mounted on top of the wall (with water supply, electrical lines). In addition to the spacers,
an optional assembly set is available that mounts the rack flush with the wall.
The flexible design allows you to work with whatever type of structural condition you may
encounter on site.
Installing with space to the wall (Standard)
Spare parts: Wall mounting with space to the wall
Pos. Description
1 Installation kit for mounting with a gap against the wall
2 Installation kit for mounting flush with the wall
8.2.4

Spare parts: TurboSmartPump II

(see Fig. 5, Pos. 3 und 4).
The Smart Dose II Rack comes standard with 4 TurboSmartPump II.
Pumps 1 & 2 are designed to work with alkaline products, and pumps 3 & 4 are designed
to work with acidic products.
Alkaline products (ph > 7) should only be used with PP material and EPDM sealing
material.
Acidic products (ph
material.
417102260 Rev. 4-02.2019
< 7) shoud only be used with PVDF material and FKM sealing
34
Installing on the Wall (Optional)
Spare parts: Wall mounting on the wall
Item. no.
201902
201903
EBS no.
10010747
10010666