Ecolab Smart Dose II Rack Manuel D'utilisation page 65

DANGER!
Risk of fatal injury from electric current!
Contact with live, current-conducting components presents imminent, life-
threatening hazard. Damage to the insulation or individual components may be
fatal.
– Work on electrical components may only be carried out by professional
electricians.
– Before starting work, create a de-energised state and ensure this state for
the duration of the work.
– Turn off immediately and organise repairs if there is any damage to the
insulation voltage supply.
– Never bridge or decommission fuses.
– When replacing fuses, comply with the rating.
– Keep voltage-carrying parts away from moisture, as this can cause a short
circuit.
Chemical hazards (dosing medium/active substance)
DANGER!
Risk of injury to the skin and eyes caused by the chemical used
(dosing medium).
– Read the enclosed safety data sheet carefully before using the dosing
medium.
– The safety regulations and the prescribed protective clothing must be
complied with when working with chemicals.
– Attention must be paid to the information included on the product data
sheet of the dosing medium used.
DANGER!
It is essential that that hands are washed prior to work breaks and at the end of
the working day. Information about the usual precautions when handling
chemicals and about the use of PPE can be found on the relevant safety data
sheet for the chemical being used and must be complied with.
ENVIRONMENT!
Leaked, spilled dosing media can harm the environment.
Leaked, spilled dosing media must be cleaned and disposed of correctly,
according to the instructions on the product data sheet. It is essential to ensure
that the required personal protective equipment is used.
Preventive action:
– Place product containers in a tank to collect leaking fluids without harming
the environment.
11
Safety
417102260 Rev. 4-02.2019