Life Span; Safety Measures Taken By The Operator; Safety Measures During Installation Of The System - Ecolab Smart Dose II Rack Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Ecolab is well aware of the importance of safety data sheets and the responsibility that
they entail. The safety data sheets that Ecolab provides are subject to constant control
and revision. Doing this guarantees that the most up-to-date information is available at all
times.
You will be provided with up-to-date safety data sheets for the products you are using
when they are first installed.
During the course of ongoing improvement and continued development of Ecolab
products, products may vary in their composition. It is possible that products may even be
replaced with other products.
In either case, the most current version of the safety data sheets will be sent to you. If you
are not sure you have a current version of the safety data sheet, please contact your
Ecolab consultant. He will be glad to assist you in guaranteeing that the measures for
safeguarding health in the workplace are ensured.
The best thing to do is to post the safety data sheets right beside the equipment or next to
the containers so that the proper countermeasures can be implemented at once in the
event of an accident.
Persons who are familiar with operating the equipment must be instructed accordingly and
trained.
2.8

Life span

Depending on properly conducted servicing (visual inspection, functional testing,
replacement of parts, etc.), the life span is approx. 10 Jahre.
Subsequently, revision – and in some cases a major overhaul – by the manufacturer is
required.
2.9

Safety measures taken by the operator

It is expressly up to the owner to train, monitor and instruct his operating and maintenance
personnel so that they comply with all of the necessary safety measures.
The frequency of inspections and controls must be complied with and documented.
2.10

Safety measures during installation of the system

DANGER!
In order to prevent the risk of the system tipping over, the system must be
fastened to a suitable wall.
15
Safety
417102260 Rev. 4-02.2019

Publicité

Table des Matières
loading

Table des Matières