Loading-Unloading The Product - MBM G2A77XS Instructions Pour Le Fonctionnement

5. 3.
INSTRUCTIONS FOR USE
Switching Electric Oven on (Fig. 3A)
When necessary, plug the appliance into the
appropriate socket.
Turn the thermostat knob to the desired position (Fig. 4 A -B).
The indicator lights "G" and "H" indicate an operating phase.
Green indicator light: The indicator is subordinated to use
of the switch-on knob. Lighting of the indicator signals the
operating phase.
Yellow indicator light: The indicator is subordinated to use
of the thermostat knob. Lighting of the indicator signals the
heating phase.

Loading-Unloading the product

Load the product to be cooked in the specific container and
place it in the cooking compartment/hob (Fig. 5).
For the oven appliance, open the door of the cooking
compartment and place the container in the specific housing.
When opening the doors, step to the side of the
appliance to avoid direct heat.
When the product is cooked, unload it and put it in a place
prepared beforehand.
Deactivation
At the end of the work cycle, turn the knobs on the appliance
to "Zero".
The light indicators must stay off.
The appliance must be cleaned regularly and
every incrustation or food deposit removed. See
chapter: "Maintenance".
If present, the indicator lights must be off at the
end of the work cycle.
Check the cleanliness and hygiene of the appliance; see
"Maintenance".
Close the network locks upstream the appliance (Gas - Water
- Electric).
Make sure that the drain cocks (if present) are "Closed".
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
A
4
Fig.
5
Fig.
- 11 - - 11 - 11 11
B