Assembling The Grass Bag - Toro 20899 Mode D'emploi

Figure 10
Note: If the lever does not latch properly, disconnect
the wire from the spark plug and check for and remove
any debris buildup in the tunnel.
5

Assembling the Grass Bag

No Parts Required
Procedure
1. Slip the grass bag over the frame as shown in
1
2
1. Handle
2. Frame
Note: Do not slip the bag over the handle
2. Hook the bottom channel of the bag onto the bottom
of the frame (Figure
g027156
3
Figure 11
3. Grass bag
(Figure
12).
Figure 11.
3. Hook the top and side channels of the bag onto the top
and sides of the frame, respectively
11).
8
g027157
Figure 12
(Figure 12).