Removing Shoulder Belt Guide; Removing/Installing Fabric Seat Cover - Harmony DEFENDER 360 Manuel D'instructions

REMOVING SHOULDER BELT GUIDE

1. Remove vehicle seat belt from RED belt guide clip.
2. Unscrew shoulder belt guide from the back of the
base.
It is recommended to store the unused shoulder belt
guide along with any other parts from the child restraint
for future use.

REMOVING/INSTALLING FABRIC SEAT COVER

TO REMOVE
Fabric covers can ONLY be removed once the harness
system has been removed (see "Removing/Installing
harness", pg. 35 - #1-3). THE HARNESS DOES NOT
NEED TO BE REMOVED IN ORDER TO REMOVE THE
BASE FABRIC COVER.
HEADREST:
1. Gently slide fabric downwards off the top of the
headrest.
2. Unhook the elastic loops from each headrest shoulder
belt guide opening on the bottom of
the headrest.
BACKREST:
1. Undo the
fastener tabs (x2) ❶ along the
bottom sides of the backrest (where
the backrest meets the base).
2. Gently slide fabric cover off the backrest.
3. Remove EPE foam from backrest fabric.
BASE:
1. Undo the fabric hook-and-loop fastener tabs (x2) ❷
from the outside of each side of the seat base (where
armrests meet backrest).
2. Gently slide the fabric cover off the plastic base from
the back of the child restraint towards the front of the
seat. Make sure that recline knob does not get caught
on fabric as you remove seat pad.
43
fabric hook-and-loop
❶
❷