Aircraft Installation - Harmony DEFENDER 360 Manuel D'instructions

• DO NOT use solvents, abrasive cleaners, or
disassemble child restraint in any way, except as
instructed.
CLEANING HARNESS AND UAS STRAPS:
• Spot clean with a damp cloth. DO NOT BLEACH.
DO NOT immerse the straps in water. Doing so may
weaken the straps.
CLEANING METAL AND PLASTIC HARNESS PARTS:
• Use mild soap and cool water on a damp cloth.
! NEVER lubricate the buckle. If buckle or harness
adjuster sticks or will not remain tight, check for
foreign objects such as food, dirt, etc. Remove objects
with tweezers and/or clean with a cotton swab. If you
cannot get the harness to remain tight with the buckle
securely locked, DO NOT USE this child restraint. Call
Harmony Juvenile Products to purchase a replacement
harness or buckle.
This restraint is certified for use in aircraft ONLY when
used WITH the harness.
This restraint is NOT CERTIFIED for aircraft use when
used as a booster WITHOUT the harness.
IMPORTANT POINTS TO REMEMBER:
1. Contact your airline before using this child restraint
on the aircraft in order to comply with their
restrictions and regulations.
2. Install this child restraint on an aircraft in the same
way it is installed in an automobile with a lap belt.
3. Check that the aircraft seat belt holds the child
restraint securely in place at all times. If it does not,
DO NOT use this child restraint.
45

AIRCRAFT INSTALLATION