Securing Child In Child Restraint - Harmony DEFENDER 360 Manuel D'instructions

Masquer les pouces Voir aussi pour DEFENDER 360:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SECURING CHILD IN CHILD RESTRAINT

1. Open harness chest clip by pressing
in pin clips while pulling apart the
two-piece chest clip ❶.
2. To loosen the harness strap:
Push the up-front metal harness
adjuster at the front of the seat
just ABOVE the adjustment strap
❷ and simultaneously pull the
chest strap towards you ❸.
3. Unbuckle
pressing on the RED buckle
release button and by pulling the
buckle clips out ❹. Move harness
straps to the side.
4. Place child in child restraint with
child's back flat against back of the
backrest.
5. Adjust headrest height so that
the bottom of the headrest is
even with the top of the child's
shoulders.
6. Place harness straps over child's
shoulders and insert buckle clips
into buckle until they 'click' into
place ❺.
!
ENSURE that harness clips and
buckle are properly fastened by
gently tugging on each.
!
ENSURE that the straps are NOT twisted.
33
harness
straps
by

Publicité

Chapitres

Table des Matières
loading

Table des Matières