Installing Shoulder Belt Guide; Using Shoulder Belt Guide - Harmony DEFENDER 360 Manuel D'instructions

INSTALLING SHOULDER BELT GUIDE

1. Locate the shoulder belt guide strap and screw
(Part V) in the storage pouch.
2. Using a
attach belt guide strap to booster
seat base by screwing into the
pre-drilled hole in the back of the
seat base.
! Before tightening screw, make sure belt strap is
pointing upwards and that the RED belt guide opening
is facing forward. DO NOT overtighten screw.

USING SHOULDER BELT GUIDE

1. Slide the vehicle's shoulder belt into the RED clip
ensuring it is flat. Position the belt guide just above
the child's shoulder ❶.
! THE VEHICLE'S SHOULDER BELT
MUST LIE ACROSS THE CHILD'S
SHOULDER.
! OPENING OF RED BELT GUIDE CLIP
MUST FACE FORWARD.
! All straps MUST be tight and
NOT twisted. ALL slack MUST be
removed from lap and shoulder
portions of the vehicle belt to ensure a snug fit.
THE LAP BELT PORTION MUST PASS UNDER BOTH
ARMRESTS AND BE POSITIONED LOW ON THE HIPS.
Phillips screwdriver,
Base
plate
❶
Belt Guide Shoulder Belt
Pilot
hole
42