Securing Child And Booster Seat In Vehicle - Harmony DEFENDER 360 Manuel D'instructions

1. Place booster seat firmly against the back of a
forward-facing vehicle seat. The vehicle seat MUST
be equipped with a 3-point lap-and-shoulder belt.
Booster must be level, stable and not rock side-to-side
(see "Choosing an appropriate vehicle seat location",
pg. 12).
2. Place child in the booster seat with child's back flat
against the back of the booster seat.
3. Adjust headrest height so that the bottom of the
headrest is even with the top of the child's shoulders.
4. Thread the shoulder belt portion of the 3-point lap-
and-shoulder belt through the
headrest shoulder belt guide ❶
and ensure that the shoulder belt
lies across child's shoulder and
chest, and NOT across child's face
or neck.
5. Thread both sides of the lap belt
and the lower end of the shoulder
belt UNDER BOTH armrests ❷
and ensure that the lap belt is snug across child's
hips just touching their thighs and is NOT across their
stomach.
6. Buckle vehicle seat belt into place ❸ and ensure it is
secure by gently pulling on it.
! THE LAP BELT PORTION MUST PASS UNDER
BOTH ARMRESTS.
! NEVER USE A VEHICLE LAP-ONLY BELT WHEN USING
THIS CHILD RESTRAINT.
! WARNING: To avoid possible entanglement hazard,
see "Entanglement with vehicle belt", pg. 41.
39
SECURING CHILD AND
BOOSTER SEAT IN VEHICLE
❸
❶
❷