Installing Locking Clip - Harmony DEFENDER 360 Manuel D'instructions

! NEVER use a vehicle seat belt system where the lap
and shoulder belts have independent retractors.
! NEVER use a vehicle seat belt system with top or
bottom anchorage points attached to the door in any
way.
! NEVER use lap belts whose anchor points are forward
of the seat crease.
A locking clip is used to prevent certain vehicle
seat belts from loosening before a sudden stop
or crash. The locking clip can ONLY be used
on a vehicle 3-point lap-and-shoulder belt. A
locking clip will not fix all types of vehicle seat
belt problems.
If your vehicle's 3-point lap-and-shoulder seat belt is
equipped with an Emergency Locking Retractor (ELR)
that is NOT convertible to function as an Automatic
Locking Retractor (ALR), then the locking clip MUST be
used.
If you have any questions about the specific type of seat
belt system in your vehicle and/or its operation, consult
your vehicle owner's manual.
• Remove the locking clip from mesh storage pocket on
restraint backrest (see "Parts list", pg. 16).
• Follow the steps to properly secure vehicle 3-point

INSTALLING LOCKING CLIP

22