Changing The Blade; Changing The V-Belt; Storage - HOLZMANN MASCHINEN BBS810SMART 400V Mode D'emploi

Changing the blade

Changing the V-Belt

16.3

Storage

Store the machine in a dry, frost-proof and lockable place when not in use. Make sure that
unauthorised persons and especially children do not have access to the machine.
Improper storage can damage and destroy important components. Only store packed
or already unpacked parts under the intended ambient conditions!
HOLZMANN Maschinen GmbH www.holzmann-maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
Loosen screws and remove the guides.

Reduce the blade tension and remove

the blade.
Insert the new blade and re-assemble

the guides.
Adjust the required blade tension as

described above.
Loosen screws on the motor.

Reduce belt tension with the screws.

Renew the belts.

Adjust the correct belt tension again.

N O TE
47
BBS810SMART_400V