Philips RESPIRONICS SimplyGo Mini Mode D'emploi page 34

3� You can view the type of alarm that occurred and the start time and
date of the alarm on the Alarm Log screen�
4� Press the < and > buttons to navigate through the list of alarms in the
log history� The log will list the 16 most recent alarms�
Notes:
• The alarm log is maintained between device Power Off and Power On
cycles (the time of Power Off is not logged)�
• The most recent alarm events in the log from the current Power On
session may be lost if the device experiences a total loss of power and
improperly shuts down�
• The alarm log maintains the most recent 16 alarms and will discard the
oldest data once its memory is full and a new alarm occurs� If less than 16
alarms have occurred, N/A will appear on some of the alarm screens�
Change the Language Selection Setting
To select a new language on the SimplyGo Mini
device, complete the following steps:
1� From the Home screen, click on the Tools icon to
access the Device Tools menu�
2� Press the page left or page right (< >) buttons
to scroll through the menus until the language
selection menu appears, shown at right�
3� Press the Language Selection icon, and then press the up and down
arrows (∧ ∨) to scroll through the list until the desired language appears,
as shown below�
SimplyGo Mini User Manual
31