Charging The Battery - Philips RESPIRONICS SimplyGo Mini Mode D'emploi

3� Insert the cord connection into the device as shown�
Note: DC power provided by the DC Power Supply will also charge the battery
when the device is turned off or is running on setting 1, 2, or 3� It may not
charge the battery when the device is running on setting 4 or 5� Charging
status can be verified with the battery icon on the Home Screen�

Charging the Battery

Important: The first time you charge the battery, be sure to charge it fully� Do
not use the DC power cord to do so; instead use AC power�
Note: The battery will begin charging whenever you connect the device to an
AC outlet, regardless of whether or not you are operating the device�
To charge the battery using the AC Power Cord provided with your system,
follow these steps�
1� Connect the AC Power Supply's output cable to the SimplyGo Mini
power input connector�
2� Connect the AC Power Cord's connector into the AC power supply�
3� Connect the AC Power Cord's plug into an AC outlet installed to meet
national or regional electrical code�
SimplyGo Mini User Manual
1
2
1
2
15