Battery; Environmental Considerations (Ambient); Laser Safety Designation (Iec 60825-1); Table 11: Table Size Requirements - Nikon Optos California P200DTx rg Manuel D'utilisation

Chapter 4 - Technical Specification
The scan head and touch screen must be positioned on a table that meets the necessary safety standards. The
table support the weight of the scan head.
MUST

TABLE 11: Table size requirements

Dimension Details
Width 950 mm (38 inches)
Depth 550 mm (22 inches) including chin rest
Height 900 mm (36 inches) to 1200 mm (48 inches)
Where wheelchair accessibility is required the table must meet wheelchair accessibility standards.

4.1.7 Battery

Do
NOT
permitted to service the device.
CAUTION
The device contains a 3V Lithium coin battery.

4.1.8 Environmental considerations (ambient)

Do operate the device in an environment that exceeds the environmental limits, see Warnings and
NOT
cautions on page 11 .

TABLE 12: Environmental ranges

Status
Normal use
Storage
Transport
Note
Device is DEHP free.

4.2 Laser safety designation (IEC 60825-1)

All P200DTx
IEC/EN 60825-1:2014, and 21 CFR1040.10 and 1040.11 except for deviation pursuant to
Laser Notice 50, dated June 24, 2007.
CAUTION
Based on current scientific knowledge, a Class 1 laser device can be considered as safe
by engineering design, and safe under reasonably foreseeable conditions of operation.
This device emits a complex pulse pattern from the front aperture of the device.
Wavelengths
P200DTx rg
Red laser 635 ±5 nm
l
Green laser 532 ±5 nm
l
Page 58 of 69
English
remove the scan head covers. Only Optos trained technical personnel are
Temperature
+10°C to +35°C
-10°C to +60°C
-10°C to +60°C
product variants are Class 1 laser devices at the eye, and comply with
Relative Humidity
(Non-condensing)
75% (maximum)
95% (maximum)
95% (maximum)
Peak power
4mW
Copyright 2017, Optos plc. All rights reserved.
Atmospheric Pressure
700hPa to 1060hPa
700hPa to 1060hPa
700hPa to 1060hPa
Part Number: G108025/4GCA