System Parts; Figure 1: P200Dtx Device Connected To Network (P200Dtx Icg Shown) - Nikon Optos California P200DTx rg Manuel D'utilisation

2.6.1 System parts

2
3
4
6
7
FIGURE 1: P200DTx device connected to network
No. Name of Part
1 Scan head
2 Head rest
3 Face pad
4 Chin rest
5 Status indicator
6 Touch screen
7 Hand control
8 Image server
9 Customer network
Patient
10
environment
Part Number: G108025/4GCA
Copyright 2017, Optos plc. All rights reserved.
1
5
(P200DTx icg
Description
The scan head comprises the light sources and electronics used to capture
patient images.
The head rest supports the patient's head when the patient is being imaged, see
Using the chin rest and head rest on page 34.
The face pad helps support the patient when the patient is being imaged.
The chin rest supports the patient's head when the patient is being imaged, see
Using the chin rest and head rest on page 34.
The color changes to show the status of the device, see Status indicator on
page 46.
The touch screen monitor is used to interact with the system. It displays
alignment feedback and captured images.
The hand control comprises buttons used to adjust the patient alignment and
capture images.
Runs the OptosAdvance
The image server will also let you review and analyze patient images.
Switches, Firewalls, Internet access, Review clients, Virtual image server (if
required)
The image server, switch and any browser-based review clients or monitors must
be positioned outside the patient environment; more than 1.5 meters (5 ft) from
the scan head.
8
B
Chris
10
shown)
software and lets you manage the networked images.
Chapter 2 - Introduction
9
Page 23 of 69
English