Battery Replacement; Cable Management - Nikon Optos California P200DTx rg Manuel D'utilisation

Chapter 3 - How to...
Disinfection
Wear powder-free gloves at all times when cleaning the device including the scan head
and main mirror. If the gloves become contaminated they must be replaced immediately.
Always follow the cleaning and disinfecting agents' manufacturer's instructions and
precautions; for storage, method of application, protective gloves, shelf life and disposal
to help assure effective and safe use of the product.
CAUTION
Be careful
Do
NOT
scan head. Always allow cleaned areas to air-dry.
External surfaces must be cleaned of all visible contamination when they become dirty or soiled with bodily
fluids. Follow your internal clinic or hospital decontamination procedures.
Cleaning of the external surfaces of the device should be carried out on a regular basis, see General cleaning on
page 47 .

3.4.8.4 Battery replacement

Do
NOT
permitted to service the device.
CAUTION
A 3V Lithium coin battery is embedded in the hardware for the device and does
users. If there is a problem, please contact your Optos representative, see Contact us on page 63 .

3.4.8.5 Cable management

Do
NOT
plugged directly into a wall socket.
To prevent electric shock:
l
l
l
WARNING
l
l
If the mains cable is damaged do not use the system and contact your Optos
representative, see Contact us on page 63.
Ordinary equipment, without protection against ingress of water.
You must regularly inspect the equipment. If there is any damage please contact your
Optos representative, see Contact us on page 63.
CAUTION
Ensure the mains socket is easily accessible.
Page 50 of 69
English
to damage the scan head covers when cleaning.
NOT
use lint cloths, tissues, or other materials that may create dust, on or near the
remove the scan head covers. Only Optos trained technical personnel are
plug the scan head into a power block or powered table. The scan head must be
Only use cables supplied by Optos.
Cables should be extended or altered.
NOT
Mains supply must be earthed.
The device may only be serviced by Optos trained personnel.
Care must be taken never to touch exposed parts of the device while in physical
contact with a patient.
require to be changed by
NOT
Part Number: G108025/4GCA
Copyright 2017, Optos plc. All rights reserved.