Quality Checks; Self-Tests; Status Indicator; Software Update - Nikon Optos California P200DTx rg Manuel D'utilisation

Ophtalmoscope panoramique
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Chapter 3 - How to...
Select the traffic light icon to display the network status and confirm if any patient details need to be reconciled
with the server.
You are notified if there are patient details that need to be reconciled with the server.

3.4.7 Quality checks

Your system automatically runs specific checks during start up and shut down.

3.4.7.1 Self-tests

Each time the system starts it runs a series of self-tests. If any problems are identified please follow the on-
screen instructions and take appropriate action or contact your Optos representative, see Contact us on
page 63 .

3.4.7.2 Status indicator

The status of the scan head is identified using different colored lights on the status indicator. For more
information see System parts on page 23 .

TABLE 5: List of status indicator lights

Status color
White
Green
Yellow
Blue

3.4.7.3 Software update

Each time your scan head shuts down it will check for software updates.
Please allow up to 15 minutes for the update to complete. You will be instructed when it is safe to switch off.
Do
accept updates when you are about to image a patient.
NOT

3.4.8 Maintenance

User maintenance is restricted to cleaning and visual checks for external damage.
Your device will be installed by Optos trained personnel. Do
they have completed the installation and training.
Your Optos representative will configure the settings when the device is installed. These
settings should
Please consult your Optos representative before changing the settings.
CAUTION
Do
NOT
permitted to service the device.
The scan head weighs 34 kg (75 lbs). This requires two people to lift or carry the unit.
You should be aware of your contractual obligations before disposing of any equipment.
Page 46 of 69
English
Description
Switching on and running self-tests
Ready for use
System error
System in standby mode
be changed in the course of normal operation.
NOT
remove the scan head covers. Only Optos trained technical personnel are
operate the device until
NOT
Part Number: G108025/4GCA
Copyright 2017, Optos plc. All rights reserved.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Optos california p200dtx faOptos california p200dtx icg

Table des Matières