Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Recycle unwanted materials instead of disposing of
them. All appliances and packaging should be sorted
and tendered at a regional recycling centre into to be
processed in an ecological manner.
Proven safety of the federal inspectorate for heavy
current installations ESTI.
2. Product symbols
In this manual and/or on the machine the following symbols are used. These
represent important information about the product or instructions on its use.
1300W Rated output
1300W
230 – 240 V~ 50 Hz
Rated voltage
230-240 V~
50Hz
11000-30000/min
min
-1
No load speed
11000-30000
180619_ayce_1328_IM
6mm,8mm bit
Ø 6&8mm
55mm max. plunge
depth
Max. 55mm
3 m cable with swiss
plug
3M
OPERATION
1. Before use
• Remove any packing material and loose parts from unit.
• Check the accessories before use. They should fit with the machine and your
purpose.
2. Functions
a. Installing/removing router bit (Fig.1)
Fig. 1
!
Unplug the router before installing the bit.
WARNING
88 89
|
It is recommended to wear protective
gloves when inserting or replacing router
bits.
1. Keep the spindle lock button
depressed and rotate the spindle
until the spindle lock fully engages.
2. Loosen the collets nut using the
wrench. Insert the shank of the
router bit into the collets.
3. Keep the spindle lock button
depressed and tighten the collets
nut using the wrench.
4. Release the spindle lock.
To remove the bit
1. Keep the spindle lock button
depressed.
2. Loosen the collets nut using the
wrench and remove the bit.
3. Tighten the collect nut and release
the spindle lock.
180619_ayce_1328_IM
GB
GB
Publicité
Table des Matières
