Functions - Ayce 2717 Manuel D'utilisation

2. Product symbols
In this manual and/or on the machine the following symbols are used. These
represent important information about the product or instructions on its use.
250W
Rated output
250W
230-240 V~50Hz
Rated voltage
230-240 V~
50Hz
11000-20000/min
min
-1
Rotational speed
11000-20000
180731_ayce_2717_IM
92X92X92mm
sanding paper
92x92x92mm
3m cable with Swiss
plug
3M
With a LED work light
to illuminate the work
area
LED
OPERATION
1. Before use
• Remove any packing material and loose parts from unit.
• Check the accessories before use. They should fit with the machine and your
purpose.

2. Functions

a. Attaching the application tool (Fig. 1)
CAUTION: For all work or when changing application tools, disconnect the tool from
power supply and always wear protective gloves. The sharp edges of the application
tools will cause personal injury. Application tools can be very hot while working.
Fig. 1
86 87 | GB
GB
180731_ayce_2717_IM