Before Use; Functions - Ayce PLD2233 Traduction De La Notice Originale

OPERATION

1. Before use

• Remove any packing material and loose parts from unit.
• Check the accessories before use. It should be fit with the machine and your
purpose.

2. Functions

Attaching a nozzle (Fig. 1)
Failure to unplug the tool could result in accidental starting causing
!
possible serious personal injury.
WARNING
Fig. 1
Removing the heat protection collar (Fig. 2)
Fig. 2
• Ensure that the heat gun is switched
off and disconnected from the supply,
and allowed to cool down before
changing a nozzle.
• Fit one of the four nozzles onto the heat
nozzle by inserting it on the heat nozzle
simply.
Note: Do not apply the nozzle too close to
the work piece being worked. The hot air
build-up can lead to overheating of the
appliance.
The heat protection collar can be removed
when working at particularly hard-to-
reach locations.