General Information; Warranty - Becker Centronic VarioControl VCJ470 Notice De Montage Et D'utilisation

Assembly and Operating Instructions

General information

The VCJ470, as supplied ex works, converts radio signals into control signals
and can be used to control a mainsconnected drive. The VCJ470 can be oper-
ated with any transmitter from the Centronic range.

Warranty

Structural modifications and incorrect installation which are not in accordance
with these and our other instructions can result in serious injuries, e.g. crushing
of limbs. Therefore, structural modifications should only be carried out with our
prior approval and in accordance with our instructions, particularly the informa-
tion contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intend-
ed use is not permitted.
The end product manufacturer and fitter have to ensure that all the current stat-
utory, official regulations and, in particular, EMC regulations are adhered to dur-
ing utilisation of our products, especially with regard to end product assembly,
installation and customer advice.
16