General; Warranty - Becker Centronic UnitControl UCS520 Notice D'utilisation

Operating Instructions

General

The UCS520 as delivered from the factory controls the drive manually or fol-
lowing external control commands. The UCS520 can be operated manually at
any time.
The device is distinguished by the fact that it is so easy to operate.

Warranty

BeckerAntriebe GmbH will be released from all warranty and product liability
obligations if the customer modifi es the equipment without prior approval from
BeckerAntriebe GmbH or if the equipment is installed incorrectly and/or con-
trary to the specifi ed installation instructions, by the customer or a third party.
Any further processing must comply with all current statutory and offi cial regu-
lations governing manufacture and advice to customers, especially the EMC
regulations.
This product is subject to technical developments and improvements. Please
refer to the current sales brochure for the precise product specifi cations.
16