General; Warranty - Becker Centronic VarioControl VC220 Notice De Montage Et D'utilisation

Assembly and Operating Instructions

General

The factory supplied VC220 converts radio signals into control signals. The
VC220 can be used to control a lighting system via radio control. The VC220
can be operated with all the transmitters of the Centronic control product range.

Warranty

Structural modifications and incorrect installation which are not in accordance
with these and our other instructions can result in serious injuries, e.g. crushing
of limbs. Therefore, structural modifications should only be carried out with our
prior approval and in accordance with our instructions, particularly the informa-
tion contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intend-
ed use is not permitted.
The end product manufacturer and fitter have to ensure that all the current stat-
utory, official regulations and, in particular, EMC regulations are adhered to dur-
ing utilisation of our products, especially with regard to end product assembly,
installation and customer advice.
12