Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The VCJ470 can, for example, be mounted inside or attached to the top rail of
any sun protection device.
Caution
Risk of injury by electric shock!
All electrical installations must be performed by an authorised electri-
cian!
During assembly please always ensure that cables cannot be damaged
during system operation. Any sharp edges which the cable comes into
contact with must be covered with suitable protective band. Damaged
wiring may be replaced by the manufacturer only.
If the VCJ470 is used to operate more than one drive, the drives must be
decoupled by relay controls. This does not apply to Becker drives with
electronic limit switches.
The switched current of the device must be observed at all times.
Mains 230 V / 50 Hz
1= N (blue)
= earth conductor (green-yellow)
2= L1 (black)
3= not required (brown)
Assembly
Installation
Tubular drive
1= N (blue)
2= s (black)
= earth
conductor
3= t (brown)
(green-
yellow)
de
en
fr
nl
19
Publicité
Table des Matières
