Becker Centronic VarioControl VCJ470 Notice De Montage Et D'utilisation page 23

4) Deleting transmitters
4a) Deleting transmitters individually
Note
The master transmitter which was programmed in point 1a) cannot be
deleted. It can only be overwritten (see Point 5).
1. Press the programming button on the master transmitter for 3 seconds.
The curtain will "nod" to confirm.
2. Now press the programming button of the transmitter to be deleted for 3 sec-
onds.
The curtain will "nod" to confirm.
3. Then press the programming button of the transmitter to be deleted for a
further 10 seconds.
The curtain will "nod" to confirm.
The transmitter has been deleted from the VCJ470.
4b) Deleting all transmitters (except master transmitter)
1. Press the programming button on the master transmitter for 3 seconds.
The curtain will "nod" to confirm.
2. Press the programming button on the master transmitter for a further 3 sec-
onds.
The curtain will "nod" to confirm.
3. Press the programming button on the master transmitter for a further 10 sec-
onds.
The curtain will "nod" to confirm.
All transmitters (except master transmitter) have been deleted from the receiv-
er.
de
en
fr
nl
23