Publicité
Les langues disponibles
Les langues disponibles
1
General information
This documentation describes the first steps for easy commissioning of AC-
TIVE Next Generation (ANG) frequency inverters.
The ANG series can be recognized by its label on the case and the identifica-
tion below the top cover.
1.1 Safety Instructions
• Strictly comply with the safety instructions and information on use in this
documentation.
• Read this documentation before installing and commissioning the device.
• Non-compliance with the precaution described may result in death, serious
injury or material damage.
• Only qualified personnel trained in installation, commissioning and opera-
tion of the devices may carry out work on the device.
• The electrical installation must be carried out by qualified electricians ac-
cording to the general and regional safety and installation directives.
• Persons who are not familiar with the operation of the device and children
must not have access to the device.
• Comply with the standards for work on equipment of heavy current instal-
lations such as EN 50178 and with national accident prevention regulations
and directives for electrical and mechanical equipment erection.
• Before commissioning and the start of the operation fix all covers, assem-
ble all components of the standard equipment and check the terminals.
• Do not perform any connection work, while the power supply is switched
on.
07/20
Quick Start Guide ANG
GB
77
Publicité
