Hama 00106938 Mode D'emploi page 7

5.2 Manually setting the date/time
• Press and hold the mode button (5) for approx. 3 seconds until the hours display begins to flash.
• Set the following information in the order listed:
• Hours
• Minutes
• Year
• Month
• Day
• To select the individual values, press the + button (3) or the – button (4) and confirm each selection by
pressing the mode button (5).
• Press the mode button (5) immediately to adopt the set value displayed and skip ahead.
• If you do not make an entry for 30 seconds, you automatically exit the setup mode.
Weekday
• To change the language in which the weekday is displayed, press the – button (4) for 3 seconds. The
current language will be displayed.
• Hold down the – button (4) to change to the other languages.
Note – Day of the week
You can choose German (GE), English (EN), Swedish (SW), Dutch (DU), Italian (IT), Spanish (SP) or
French (FR) for the weekday display.
Setting the time zone
Note – Time zone
• The DCF signal can be received over long distances, but always transmits the current Central European
Time in Germany. Make sure you account for the time difference in countries with another time zone.
• If you are in Moscow, the time is 3 hours later than in Germany. This means that you should set +3 for
the time zone. The clock then automatically sets the time to 3 hours after the DCF signal received or
relative to the manually set time.
• Press and hold the + button (3) for approx. 3 seconds until the time zone symbol
• Press and hold the mode button (5) for approx. 3 seconds to set the required time zone difference.
• To select the individual values, press the + button (3) or the – button (4) and confirm each selection by
pressing the mode button (5).
• Press and hold the + button (3) for 3 seconds to switch the display between local and time zone-shifted
time.
6
F is displayed.