Hama 00106938 Mode D'emploi page 5

Warning – Batteries
• Immediately remove and dispose of dead batteries from the product.
• Only use batteries (or rechargeable batteries) that match the specified type.
• Do not mix old and new batteries or batteries of a different type or make.
• When inserting batteries, note the correct polarity (+ and - markings) and insert the batteries
accordingly. Failure to do so could result in the batteries leaking or exploding.
• Do not overcharge batteries.
• Keep batteries out of the reach of children.
• Do not short circuit the batteries/rechargeable batteries and keep them away from uncoated metal
objects.
4. Getting Started
• Open the battery compartment (8), insert two AAA batteries with the correct polarity and close the
battery compartment(8).
5. Operation
Note
Hold down the + button (3) or the – button (4) to select the values faster.
5.1 Automatic date/time setting using the DCF signal
• Once you have inserted the batteries, the display is switched on, an acoustic signal sounds and the alarm
clock automatically starts searching for a DCF radio signal. During the search, the
• radio icon will flash. This process can take 3 to 5 minutes.
• When the wireless signal is received, the date and time are automatically set.
Display
Display flashing
Display steady (not flashing)
4
/
Searching for the DCF signal
Active
Successful – signal is being received