Installing And Securing The Device - Kaco blueplanet 15.0 TL3 Mode D'emploi

B
C
A
D
B
C
Fig. 7: Minimum clearances for wall mounting
Key
1 Mount
2 Fixings for mounting
3 Screws for mounting (5x)
A Minimum clearance: 250 mm (without device315
mm )
recommended distance405 mm (without device 340
mm *)
B Minimum clearance: 500 mm
↻ Cardboard packaging with mount and mounting kit removed from the packaging and opened.
1 Mark the mounting position on the wall surface according to the position of the mount by drawing a line.
2 Mark the positions of the drill holes using the slot in the mount.
NOTE: The minimum clearances between two devices, or the device and the ceiling or floor have already been
taken into account in the diagram.
3 Fix the mount to the wall using suitable mounting fixtures from the mounting kit.
NOTE: Make sure that the mount is oriented correctly.
» Proceed with the installation of the device.
6.4

Installing and securing the device

CAUTION
Risk of injury from improper lifting and transport.
If the device is lifted improperly, it can tilt and result in a fall.
› Always lift the device vertically using the openings provided.
› Use a climbing aid for the chosen installation height.
› Wear protective gloves and safety shoes when lifting and lowering the device.
KACO blueplanet 15.0 TL3 KACO blueplanet 20.0 TL3
65,5 mm
1
2
5
3
4
A
405 mm
315 mm
1386 mm
260 mm
1120 mm
Fig. 8: Position of wall bracket / suspension
4 Screw for securing purposes (1x)
5 Bracket to prevent device displacement
C Minimum clearance: 700 mm
D Recommended clearance: 250 mm
*
565 mm
328 mm
Page 15