Descaling; Descaling Procedure - Gaggia Milano CADORNA STYLE RI9600 Mode D'emploi

English
30
DESCLING BREW GROUP CLEAN
ON/OFF my favourites HOME clean/setting
C L
A C
N
A E
L C
4219-450-07541 MANUAL GAG. CAD. PLUS EN-FR 120US rev_2.indd 30

Descaling

Descaling procedure

Descaling needs to be carried out when the machine signals it.
Use only the Gaggia descaling solution designed to guarantee the machine's
excellent performance. The use of other products could damage the machine and
leave residue in the water. Failure to descale the machine will void the warranty.
1 Remove the Classic Pannarello (only for Cadorna Style model).
2 Press the CLEAN/SETTING
on the display.
Press the " DESCALING " button, then press the START/STOP
-
3 Remove the drip tray and the coffee pucks container, empty them, and insert
them in the machine again.
START/STOP
4 Remove the water tank and empty it. Remove the INTENZA+ filter, if present.
5 Empty the entire bottle of Gaggia descaling solution into the water tank and fill
the tank with water up to the CALC CLEAN notch. Reinsert it in the machine.
6 Place a large container (1.5l) under the steam tube and coffee dispenser.
7 Follow the instructions shown on the display to launch the descaling
procedure. This procedure lasts approximately 25 minutes and consists of
a descaling cycle and a rinse cycle, carried out with dispensing at regular
intervals.
8 Once the descaling cycle is complete, rinse the water tank, and water circuit,
following the instructions shown on the display.
9 Replace the INTENZA+ filter into the water tank.
Note: it is possible to pause and resume the procedure at any time by pressing the
START/STOP button.
START/STOP
Warning: when the descaling procedure is active, the brew group cannot be
removed. Wait for the descaling process to end, then remove the brew group.
button and select the " CLEAN " button shown
clean/setting
button.
START/STOP
23/04/2020 09:31:33