Detailed Function Setting; Airflow - Mitsubishi Electric PZ-62DR-E Manuel D'instructions

Detailed function setting

Airflow

Adjust the output of the fan speed.
Note
• Each fan speed can set from 25% to 100% of output by 5% pitches.
• The supply fan speed and exhaust fan speed can be set independently.
Button operation
1
Commissioning menu
Initial setting
Airflow
Auto bypass
External input
Service
Main menu:
Cursor
F1 F2
M-NET address
Select:
Address
1/2
Page
F3 F4
Airflow
All
Airflow
Loading
Accessing the «Airflow» screen
Select "Airflow" from the Main menu >
Commissioning, and press the
Select the address of the unit.
The address selection screen will appear.
Press the or
address number of the unit. When choosing same
setting to all Lossnay units connected with the
controller, select the address to "All".
The product data is loaded before the screen
will appear. [Loading] is displayed. (10 to 60
seconds)
Eng-32
P
OFF
Main
button.
button to select the M-NET