Restrictions For The Sub Remote Controller - Mitsubishi Electric PZ-62DR-E Manuel D'instructions

Setting and display items
Commissioning External
input
Service
Restriction Operation
Error information
Error history
Run time
Maintenance interval
Maintenance Filter information

Restrictions for the sub remote controller

Main Main menu
User options
Commissioning
Maintenance
Main display:
Cursor
CO control Set the "Auto" fan speed to operate according to the
2
input from the CO
Input Use to register the maintenance information.
maintenance • Model names and serial numbers
info. • Dealer information
• Initializing maintenance information
* Refer to the Installation manual.
Function Use to set functions for each Lossnay.
setting
Initializing Use to intialize the remote controller.
Use to lock selected functions and to skip selected
lock and fan fan speed.
speed skip • The locked functions cannot be operated.
• The skipped fan speed cannot be operated.
Use to check error information when an error occurs.
• Error code, error source, unit model, manufacturing
number, contact information (dealer's phone
number) can be displayed.
* The unit model, manufacturing number, and
contact information need to be registered in
advance to be displayed.
Use to check the error history of the Lossnay unit.
Use to check the run time of the Lossnay unit.
Use to set the maintenance interval of the filter and
Lossnay core.
Use to check the filter and Lossnay core status.
• The cleaning sign can be reset.
Eng-15
Setting details
sensor.
2
The following settings cannot be made
from the sub remote controller. Make these
settings from the main remote controller.
"Main" is displayed in the title of the Main
menu on the main remote controller.
• Fan speed timer
• Timer (On/Off timer, Auto-Off timer)
• Weekly timer
• Night-purge setting
• Airflow
• External input (CO control)
2
Reference
page
36
—
37
39
41
45
48
49
43
50