Setting The Fan Speed; Setting The Vane Direction - Mitsubishi Electric RedLINK MHK2 Manuel D'utilisation

Setting the Fan Speed

Touch Fan on the controller home screen to cycle
through available fan speed settings until the
desired fan speed is displayed. Your changes will
save automatically.
Available Fan speed settings:
• Auto: MHK2 will determine the optimal fan
speed to meet the set temperature.
• Fixed Speed (Adjustable): The fan will run
continuously, at one of five different speeds.
Each time you touch Fan, the fan speed will
increase (quiet, low, medium, high, super high).
Note: Available Fan Speed settings may
vary depending on the indoor unit type and
series.

Setting the Vane Direction

Touch Vane on the controller home screen to
cycle through available vane modes until the
desired mode is displayed. Your changes will save
automatically.
Available Vane modes:
• Auto
• Swing
• Ceiling
• High
• Middle
• Low
• Floor
Note: Available Vane Direction settings may
vary depending on the indoor unit type and
series.
33-00447EFS_B.indd 8
Heat
Vane
Heat
Vane
Heat
Vane
Heat
Auto
Leave Return
Vane
Heat Auto
Leave Return
Vane
Heat Auto
Leave Return
Vane
8
Auto
Leave Return
Leave Return
Leave Return
Heat
Auto
Leave Return
Vane
Heat
Auto
Leave Return
Vane
Heat Auto
Leave Return
Vane
10/17/2019 3:22:53 PM