Adjusting The Temperature In Auto Mode - Mitsubishi Electric RedLINK MHK2 Manuel D'utilisation

Adjusting the Temperature in Auto Mode

Auto mode (when the controller automatically chooses heating or cooling to reach
your desired temperature) is enabled by default. If your heating or cooling professional
disabled it, you will not see Auto appear as an option under Mode on the controller home
screen.
To choose your preferred temperatures for both heating and cooling in Auto mode, follow
the steps below.
Touch Mode on the controller home screen
1
until Auto appears. Then touch
choose your preferred temperature setting for
the mode that's currently active (heating or
cooling).
2 Next, touch the text (either HEAT or COOL)
next to where the set point is displayed to
switch to the inactive mode.
3 Touch or
temperature in the other mode. After
3 seconds of inactivity, your setting will take
effect, and the controller screen will show the
set point of the active mode.
33-00447EFS_B.indd 6
or
to choose your preferred
to
Auto
Leave Return
Vane
Auto
Leave Return
Vane
6
Auto Auto
Auto
Leave Return
Vane
Auto
Auto
Auto
Vane
10/17/2019 3:22:52 PM