Safety Instructions Relating To Operation; Vibration Load - AL-KO GT 2000 Mode D'emploi

Safety instructions
3.1.4 Safety instructions
relating to operation
WARNING!
Risk due to electromag-
netic field
This power tool produces
an electromagnetic field
during operation. Under
certain circumstances, this
field may impair active or
passive medical implants.
■
In order to reduce the
risk of serious or fatal
injury, we recommend
that any persons fitted
with medical implants
should consult their doc-
tor and the manufactur-
er of the medical im-
plant before operating
the power tool.
■
Always operate the machine
with two hands.
■
Always keep hand and feet
away from the cutting device,
above all when switching on
the motor.
■
Wait for the cutting device to
come to a standstill after the
motor has been switched off.
■
Only remove cuttings when
the motor and cutting device
are at a standstill.
442601_a
■
Because of danger of cutting
injuries, do not touch the line
cutter with unprotected hands.
■
After pulling out a new line, al-
ways bring the appliance into
its normal working position
before switching it on.
■
Do not use a metallic cutting
line.
■
Always keep the guard plate,
spool head and motor clear of
mowing residues.
■
People who are not familiar
with the appliance should
practice handling it while the
motor is turned off.
■
When working on a slope:
■
Never work on a smooth
and slippery slope.
■
Always mow across the
slope, never down or up.
■
Always stand below the
cutting device.
■
After contact with a foreign
object:
■
Switch off the motor.
■
Check the machine for
damage.

3.2 Vibration load

■
Danger due to vibration
The actual magnitude of the
vibration emissions during the
use of the appliance may de-
viate from that stated by the
33