Télécharger Imprimer la page

Help In Case Of Malfunction - AL-KO GT 2000 Mode D'emploi

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 63
GB
4. Thread the cutting line outwards through
opening (06/5) of the spool head.
5. Fit cover (06/2) and press on until it engages.
6. Install the rechargeable battery in the appli-
ance.

9 HELP IN CASE OF MALFUNCTION

CAUTION!
Risk of injury
Sharp-edged and moving appliance
parts can lead to injury.
Always wear protective gloves
during maintenance, care and clean-
ing work.
Malfunction
Additional cutting line is not
supplied.
Motor does not run.
Motor keeps cutting out.
Motor running, but the cutting
line does not move.
Appliance vibrates unusually. Spool is contaminated.
Rechargeable battery operat-
ing time is significantly short-
er.
40
Cause
Spool is empty.
Rechargeable battery is flat.
Rechargeable battery miss-
ing or rechargeable battery
not seated correctly.
Power supply is interrupted.
The motor protection switch
has switched off the motor
due to overload.
Appliance errors
The On/Off switch is de-
fective.
Appliance errors
Appliance errors
Grass is too long or too wet.
Cutting height is too low.
The service life of the re-
chargeable battery has ex-
pired.
Help in case of malfunction
NOTE
For malfunctions that are not listed in
this table or that you cannot resolve
yourself, please contact our customer
service.
Remedy
Change the spool.
Charge the rechargeable battery.
Insert the rechargeable battery cor-
rectly.
1. Remove the battery.
2. Clean the plug contacts of the ap-
pliance.
Wait until the motor protection switch
enables the motor again.
Contact an AL-KO service centre.
Contact an AL-KO service centre.
Clean the spool, renew it if necessary.
Contact an AL-KO service centre.
Cut the grass at a greater height.
Let the grass dry.
Cut the grass at a greater height.
Replace the rechargeable battery.
Only use genuine accessories from
the manufacturer.
GT 2000

Publicité

loading