Safety Instructions For The Lawn Trimmer; Safety Instructions Relating To Operation; Noise Pollution - AL-KO GT 4030 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 71
GB
3.2 Safety instructions for
the lawn trimmer
3.2.1 Safety instructions
relating to operation
WARNING!
Risk due to electromag-
netic field
This power tool produces
an electromagnetic field
during operation. Under
certain circumstances, this
field may impair active or
passive medical implants.
In order to reduce the
risk of serious or fatal
injury, we recommend
that any persons fitted
with medical implants
should consult their doc-
tor and the manufac-
turer of the medical im-
plant before operating
the power tool.
Always operate the machine
with two hands.
Always keep hand and feet
away from the cutting device,
above all when switching on
the motor.
Wait for the cutting device to
come to a standstill after the
motor has been switched off.
36
Only remove cuttings when
the motor and cutting device
are at a standstill.
Because of danger of cutting
injuries, do not touch the line
cutter with unprotected hands.
After pulling out a new line, al-
ways bring the appliance into
its normal working position
before switching it on.
Do not use a metallic cutting line.
Always keep the guard plate,
spool head and motor clear of
mowing residues.
People who are not familiar
with the appliance should
practice handling it while the
motor is turned off.
When working on a slope:
Never work on a smooth
and slippery slope.
Always mow across the
slope, never down or up.
Always stand below the
cutting device.
After contact with a foreign
object:
Switch off the motor.
Check the machine for
damage.

3.2.2 Noise pollution

A certain level of noise exposure
from this appliance is inevitable.
Carry out noisy work at approved
Safety
GT 4030

Publicité

Table des Matières
loading

Table des Matières