Before Starting The Equipment - Scheppach AB1900 Traduction Des Instructions D'origine

Chiseling
Main handle:
Vibration emission value a
= 17,447 m/s
2
Uncertainty K = 1,5 m/s
Auxiliary handle:
Vibration emission value a
= 19,546 m/s
2
Uncertainty K = 1,5 m/s
Additional
power tools
Warning!
The specified vibration value was estab-
lished in accordance with a standardized
testing method. It may change according
to how the electric equipment is used and
may exceed the specified value in excep-
tional circumstances.
The specified vibration value can be used
to compare the equipment with other elec-
tric power tools.
The specified vibration value can be used
for initial assessment of a harmful effect.
Keep the noise emissions and vibra-
tions to a minimum!
• Only use appliances which are in per-
fect working order.
• Service and clean the appliance regu-
larly.
• Adapt your working style to suit the ap-
pliance.
• Do not overload the appliance.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Heruntergeladen von manualslib.de
h, Cheq
2
h, Cheq
2
information for
Handbücher-Suchmachiene
• Have the appliance serviced whenever
necessary.
• Switch the appliance off when it is not
in use.
• Wear protective gloves.
Residual risks
Even if you use this electric power
tool in accordance with instructions,
certain residual risks cannot be rules
out. The following hazards may arise in
electric connection with the equipment's con-
struction and layout:
1. Lung damage if no suitable protective
dust mask is used.
2. Damage to hearing if no suitable ear
protection is used.
3. Health damage caused by hand-arm vi-
brations if the equipment is used over
a prolonged period or is not properly
guided and maintained.

7. Before starting the equipment

Before you connect the equipment to the
mains supply make sure that the data on
the rating plate are identical to the mains
data.
Always pull the power plug before making
adjustments to the equipment.
• Get to know your machine. Familiarise
yourself with its application and limita-
tions, as well as the specific potential
hazards.
• Make sure that the switch is OFF before
inserting the plug into the socket.
• Make sure that the machine is assem-
bled completely and properly.
GB | 27