General Power Tool Safety Warnings - Scheppach AB1900 Traduction Des Instructions D'origine

In addition, the applicable accident pre-
vention regulations must be strictly ob-
served.
Other general occupational health and
safety-related rules and regulations must
be observed.
The liability of the manufacturer and re-
sulting damages are excluded in the event
of modifications of the machine.
Please note that our equipment has not
been designed for use in commercial,
trade or industrial applications. Our war-
ranty will be voided if the equipment is
used in commercial, trade or industrial
businesses or for equivalent purposes.
5. General Power Tool Safety
Warnings
Attention! The following basic safety
measures must be observed when using
electric tools for protection against electric
shock, and the risk of injury and fire. Read
all these notices before using the electric
tool and keep the safety instructions for
later reference.
1. Work area safety
a) Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may
ignite the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
2. Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, ra-
diators, ranges and refrigerators. There
is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or
wet conditions. Water entering a pow-
er tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for out-
door use. Use of a cord suitable for
outdoor use reduces the risk of elec-
tric shock.
f) If operating a power tool in a damp lo-
cation is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of elec-
tric shock.
GB | 23